Skip to main content

Workflow article

How to tune a whole verse and its doubles with Melodyne in Ableton Live

Tune a comped verse and its doubles with Melodyne in Ableton Live: track by track with the plug-in, or all of it in one Melodyne session with EDIT.

How to tune a whole verse and its doubles with Melodyne in Ableton Live. The article title on the null.audio title card.

A finished verse in Live is rarely one clip. It's a comp of three or four takes on the lead track, and the doubles sit on their own tracks underneath. To tune all of it with Melodyne, you either work track by track with the Melodyne plug-in, or you open the lead and its doubles together with null.audio EDIT.

Why a verse is more work than a clip

The lead is several clips: comping leaves you with pieces cut from different takes, and each piece is its own clip in the Arrangement. The doubles sit on other tracks, and they have to match the lead after it's tuned, so you keep jumping between tracks. And you want to hear all of it in the mix. A note that sounds fine soloed can rub against the chords once the beat and your vocal chain are on.

Option 1: the Melodyne plug-in, track by track

This works with any Melodyne edition and costs nothing extra.

  1. Consolidate the comp. Select the clips of the verse on the lead track and press Cmd/Ctrl+J. Live turns them into one clip. Do the same on each double track.
  2. Put Melodyne first on the lead track, before your EQ and compressor.
  3. Let Melodyne hear the verse. Live passes the plug-in audio only while it plays, so play the verse through once. The details are in How to use Melodyne in Ableton Live.
  4. Tune the lead. Correct the notes that are off, and leave the ones that already carry the performance.
  5. Repeat on each double track, listening against the tuned lead.
  6. Print the result. Freeze and flatten the track, or record it to a new audio track. Freezing renders everything on the track, your effects included, so check the order of your devices first.

What it costs: time. Each track is a separate Melodyne instance with its own pass, and when you change the comp you consolidate, play it in and tune again.

Option 2: the whole verse and its doubles in one Melodyne session (EDIT)

EDIT opens Arrangement clips in Melodyne directly, and plays your edit through the track's own vocal chain while you work. Since 1.1 it takes a whole verse and the doubles that play with it in one go.

Before you start, add the EDIT Bridge plug-in to the lead track and to each double track, first in the chain. It's what lets you hear the edit in the mix.

  1. Click one clip of the verse in the Arrangement. EDIT takes that clip and the clips right next to it on the same track, so the whole comp comes along.
  2. Tick your doubles. The panel lists the clips on other tracks that play at the same time. Tick the ones you want in the same edit.
  3. Press Edit in Melodyne. The button counts the clips, such as Edit 4 clips in Melodyne. They all open in the same Melodyne session.
  4. Tune while the song plays. Press play in Live: each track plays your edit with the rest of the song, through its own effects. Edited · Original switches between your edit and the original without stopping.
  5. Press Apply. Each track gets its edited audio in place of the original clips. Your vocal chains stay on the tracks, so nothing gets printed into the audio.

If you'd rather tune every clip on the lead track, wherever it is in the song, press Whole track instead. After Apply the panel offers the next part on the same track, such as Edit Chorus 1, so you can work through the song in order. Revert to originals puts the original clips back if you change your mind.

Melodyne opens a whole verse, your doubles or a whole track at once.

What it costs: EDIT is a separate purchase, and you need your own Melodyne licence. It works in Arrangement View with Ableton Live 12.3 or later and Max for Live, on macOS or Windows.

How I tune doubles

  • Tune the lead first. The doubles follow the lead, so get that right before anything else.
  • Don't make the doubles identical. A double tuned note for note to the lead sounds like one louder voice. Fix the notes that clash with the lead or the chords, and leave small differences in the rest. That's where the width comes from.
  • Listen in the mix, not soloed. Most decisions are easier with the beat and the vocal chain on. Switch to Original now and then to check you haven't flattened the performance.
  • Watch the long notes. Held notes at the end of a line are where a double drifts most and where it's most audible.
  • Timing is a separate job. If the doubles flam on consonants, tuning won't fix that. Align them to the lead first, by hand or with ALIGN, as described in How to align vocal doubles in Ableton Live.

Which one should you use?

  • One short part, once: the Melodyne plug-in. It's already on your computer.
  • Whole verses with doubles, revised often: EDIT, so a new comp or another round of tuning doesn't cost you another pass on every track.

The EDIT guide shows each step on the panel. Why Melodyne needs a Transfer pass in Live at all is in ARA in Ableton Live, and the two routes are side by side in Melodyne in Ableton Live: Transfer or EDIT.

Sources

Primary documentation used for the technical details in this article.

  1. 01Melodyne in Live (opens in a new tab)Celemony (Melodyne 5 manual)
  2. 02Arrangement View: Consolidating Clips (opens in a new tab)Ableton Reference Manual (Live 12)

null.audio ALIGN and null.audio EDIT bring vocal alignment and ARA editing into Live.